home *** CD-ROM | disk | FTP | other *** search
- ***********************************************************************
-
- WINDOWS NT DRIVER SETUP INFORMATION
- for
- Trident 94x0 AGi Users
-
-
- ***********************************************************************
- Windows NT Device Drivers Version 1.01 Jul. 12, 1995
- ***********************************************************************
-
- Contents
-
- 1.0 Introduction
- 2.0 Supported Resolutions
- 3.0 Installation Notes for Windows NT Version 3.5
-
- *****************************
-
- 1.0 Introduction
-
- This Accelerate Driver runs on the following products:
-
- Trident 94x0 AGi, VESA or PCI local bus adapter
-
- The Graphics Device Drivers supplied here are for the Microsoft
- Windows NT operating system version 3.5.
-
- *****************************
-
- 2.0 Supported Resolutions.
-
- 16 colors 256 colors 65000 colors 16.7 million
- Resolutions 4 bpp 8 bpp 16 bpp 24 bpp
-
- 640 x 480 0.5/1/2MB 0.5/1/2MB 1/2MB 1/2MB
- 800 x 600 0.5/1/2MB 0.5/1/2MB 1/2MB 2MB
- 1024 x 768 0.5/1/2MB 1/2MB 1/2MB N/A
- 1280 x 1024 1/2MB 2MB N/A N/A
- 1600 x 1200 1/2MB 2MB N/A N/A
-
- .5/1/4MB - Supported on 0.5, 1 or 2 Megabyte trident 94x0 AGi products
- N/A - Not Supported
-
- ****************************
-
- 3.0 Installation Notes for Windows NT
-
- This driver package containing:
-
- - AGI.SYS (Trident AGi graphics miniport driver)
- - AGI.DLL (Trident AGi graphics display driver)
- - OEMSETUP.INF (setup files used by Windows NT Setup program)
- - README This README file for Windows NT Version 3.5
-
- Windows NT drivers are included on Disk #2 of this package. They are
- located in the \NT35 sub-directory.
-
- Procedure:
-
- 1. Run the Windows NT display Setup program located in the Control Panel, Main
- group.
-
- 2. Select "Change Display Type..." button from the Display Settings options.
-
- 3. Select "Change..." button from the Display Type options.
-
- 4. Select "Other..." button from the Select Device options.
-
- 5. Windows NT will prompt you for the correct path. Enter A:\NT35 if disk 2
- is loaded in drive A:.
-
- 6. A list of modes will appear, select the resolution and color
- depth desired.
-
- 7. Restart Windows NT. Windows NT will start up using the trident AGi drivers.
-
- Note: If a color depth or resolution that is not supported by your
- card is selected, Windows NT will substitute 640x480, 256 colors mode
- as the current display mode.
-